Ultracentrifugation for Wastewater Research

Ultracentrifugation: The Optima XPN Preparative Ultracentrifuge enables researchers to process up to 12 samples in one hour or less. The system is easy to setup, requiring only a few, simple manual steps: loading the homogenized sample into a tube, loading and programming the centrifuge, running the centrifuge, and decanting and re-solubilization of the pellet. With low consumable cost and no risk of clogging, the Optima XPN Ultracentrifuge gives researchers control and options for scalability by allowing for concentrations as high as fifty times of virus from small samples.

Biosafe* Centrifugation Labware

Robust offerings in BioSafe labware work in conjunction with rotors and centrifuges to help your lab achieve the highest level of biocontainment possible.

Optima XPN Preparative Ultracentrifuge

Isolate virus from large or small volumes
Includes reporting functions/reports
GMP supporting features
Optional BioSafe HEPA filters captures release of bio-organisms during operation

Type 45 Ti Fixed-Angle Rotor

• Max Number of Tubes/Volume: 6 x 94 mL
• Max RPM: 45,000

Type 50.2 Ti Fixed-Angle Rotor

• Max Number of Tubes/Volume: 12 x 39 mL
• Max RPM: 50,000

Ultracentrifuge Swinging Rotor Bucket Sw-41-Ti-331362

SW 41 Ti Swinging Bucket Rotor

• Max Number of Tubes/Volume: 6 x 13.2 mL
• Max RPM: 41,000

Ultracentrifuge Swinging Bucket sw 32 ti Rotor

SW 32 Ti Swinging Bucket Rotor

• Max Number of Tubes/Volume: 6 x 38.5 mL
• Max RPM: 32,000

Related Resources

*BioSafe is a term intended to describe the enhanced BioSafety features of our products.
**Based on sample results below detectable limits.
For research use only. Not for diagnostic purposes. All other products identified are not for use in diagnostic procedures.
BioCertified is a term used to describe our products which have been tested and validated to demonstrate containment of microbiological aerosols by an independent, third-party facility (Health Protection Agency, Porton Down, UK).