What is required to comply with the USP chapter on Conductivity, USP<645>, for a TOC analyzer?

For a TOC analyzer to report conductivity in compliance with USP<645>, it must be possible to calibrate both the cell constant and the meter accuracy. The PAT700 is designed to comply fully with the requirements of USP<645>.

In USP<645> for Conductivity, the calibration requirements include checking the conductivity instrument’s cell constant using a traceable, certified conductivity solution, as well as checking the meter accuracy using a NIST-certified resistor. The PAT700 allows the use of a traceable, certified conductivity solution to check its cell constant and also the use of a NIST-certified resistor to check the accuracy of its meter. Hence it is fully compliant and can be used to report both TOC to USP<643> and Conductivity to USP<645>.

Stay up to date with our newsletter

Receive timely updates on your favorite topics from the experts at Beckman Coulter Life Sciences

© 2000-2024 Beckman Coulter, Inc. All rights reserved. Beckman Coulter, the stylized logo, and the Beckman Coulter product and service marks mentioned herein are trademarks or registered trademarks of Beckman Coulter, Inc. in the United States and other countries. All other trademarks are the property of their respective owners.

NOT ALL PRODUCTS ARE AVAILABLE IN ALL COUNTRIES. PRODUCT AVAILABILITY AND REGULATORY STATUS DEPENDS ON COUNTRY REGISTRATION PER APPLICABLE REGULATIONS The listed regulatory status for products correspond to one of the below: IVD: In Vitro Diagnostic Products. These products are labeled "For In Vitro Diagnostic Use." ASR: Analyte Specific Reagents. These reagents are labeled "Analyte Specific Reagent. Analytical and performance characteristics are not established." CE-IVD, CE: Products intended for in vitro diagnostic use and conforming to the In Vitro Diagnostic Regulation (IVDR) (EU) 2017/746. (Note: Devices may be CE marked to other directives.) RUO: Research Use Only. These products are labeled "For Research Use Only. Not for use in diagnostic procedures." LUO: Laboratory Use Only. These products are labeled "For Laboratory Use Only." No Regulatory Status: Non-Medical Device or non-regulated articles. Not for use in diagnostic or therapeutic procedures.